Temperature and humidity measurement probe

Barcode: NT-310

Regular price: €35,64
Regular price
Sale price: €35,64
Unit price: per

excl. VAT: €29

Low stock: 6 left

Product variants

Description
Payment methods
Warranty

Temperature and Humidity Controller HT-310 TENSE

Product description

Temperature and humidity control relay. The humidity and temperature controller has separate outputs, hysteresis adjustment, and is designed for flush mounting. Device dimensions: 72 × 36 × 100 mm.

This controller is suitable for air conditioning, heating systems, dehumidification, heating, and other processes where temperature and humidity measurement and control are required.

Main characteristics

Sensor type: NT-310 (combined temperature and humidity sensor)
Temperature measurement range: -19.9 °C ... +80.0 °C; 1 °C step
Humidity measurement range: 5 % ... 95 %; 1 step
Control principle: on-off
Outputs:
- °C OUT: changeover control contact, 2A resistive load for temperature
- %RH OUT: normally open contact, 2A resistive load for humidity
Operating modes:
- Temperature: cooling/heating
- Humidity: dehumidifying / humidifying
Hysteresis: separately adjustable for temperature and humidity
ALARM: absolute, relative temperature or sensor error
Switch-on / switch-off delay: for cooling mode (e.g., compressors)
Fixed offset: adjustable for temperature or humidity by changing the sensor cable length
Password protection: security of set parameters
Memory: non-volatile EEPROM memory for settings
Connection: easily disconnected and/or connected to the controlled device using quick connectors
Power supply: 100-240 V, 50-60 Hz

Usage

The controller can be used as:

Hygrostat / hygrometer / humidity meter / densitometer (hygrometer)
Thermostat / thermal relay
Humidity level and air temperature measurement relay

Safety warning

When connecting the temperature sensor, observe polarity; incorrect connections may damage the sensor or cause the controller to malfunction.
When connecting the controller to the power supply, use a 250 mA / 250 V fuse and cables of appropriate cross-section.
Observe electrical safety rules.
For signal contacts, use shielded twisted pair grounded wire. Run cables away from power lines, contactors, and electromagnetic fields.
Important: The device must be installed in an environment with a temperature of -20...+55 °C, otherwise the plastic casing may deform and the controller may malfunction.

Online card payment – after completing your order, you will be redirected to the payment portal. You will receive payment confirmation by email.

Cash on delivery – you will pay the amount specified in the payment notification to the courier upon delivery.

Bank transfer payment – a proforma invoice with the bank account number, which you will need to enter during payment, will be sent to your email no later than the next business day.

Payment to account – this option is available to partners who have signed a cooperation agreement with our company.
If you wish to use the latter two methods, please contact our manager, who will provide instructions on how to obtain an invoice with or without VAT.

The electrical equipment supplied meets high quality standards, has a 24-month warranty and complies with all EU requirements.
We also offer free delivery (for orders over 100 EUR), and a flexible system of discounts and promotions. The technical knowledge and experience of our staff enable us to provide high-quality consultations and, if necessary, offer alternative electrical products.