Booster sequence relay

General information

Hydrophore displacement relays were designed to

activate when needed and operate simultaneously.

Device usage and operating principle

The sequence of hydrophores is as follows: (H1) - (H2) - (H3) and (H1-H2) -.

(H2-H3) - (H1-H3). It activates the hydrophores with the same number,

where the switches are closed, and keeps them running for a period "t". After time "t", another hydrophore or group of hydrophores is activated and

"t" continues in this manner. It deactivates the hydrophores with the same number,

when the switches are open.

Note: Do not connect power to the inputs and outputs (P1, P2, P3) of the

pressure switch.

Maintenance

Turn off the device and disconnect it from its connections. Clean the device cone with a swab. Do not use any wires or chemicals that could

damage the device. After cleaning, ensure the device is working.

Warning

Use the device according to the operating instructions.

Do not use the device in a humid environment.

The kit includes a switch and an automatic circuit breaker.

Place the switch and circuit breaker near the equipment so that the operator can easily access them.

Mark the switch and circuit breaker as

equipment disconnects.

Technical specifications:

Operating voltage (Un).....: 150-250 V AC

Operating frequency.......: 50/60 Hz.

Operating power..............: <6VA

Operating temperature....: -20°C.... +55°C

Time(t)......................: 10 min.

Display......................: HSR-02=5 x LED, HSR-03=7 x LED

Connection type............: Terminal connection

Contact.....................: 3A/250V AC (resistive load)

Number of hydrophores........: 2 (HSR-02) and 3 (HSR-03)

Cable diameter..............: 1.5 mm² (HSR-02), 2.5 mm² (HSR-03)

Weight..........................: max 220 g.

Mounting..........................: vertical mounting on panel or DIN rail.